. . . . . . . . . . . . . . . . . . . . . . . DEClaser 3500 Printer AppleTalk Installation Guide EK-D350P-AG.A01 Digital Equipment Corporation Maynard, Massachusetts Part Number 194682-001 - 08/12/94 - - Saved by digital - Rev # - File Name APPLE2.
. . . . . . . . . . . . . . . . . . . . . . . First Printing, June 1994 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description.
. . . . . . . . . . . . . . . . . . . . . . . FEDERAL COMMUNICATIONS COMMISSION NOTICE Class B Equipment FCC ID: A09-LN14X-AT This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
. . . . . . . . . . . . . . . . . . . . . . . Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Digital Equipment Corporation may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
. . . . . . . . . . . . . . . . . . . . . . . ELECTROSTATIC DISCHARGE A discharge of static electricity from a finger or other conductor may damage circuit boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: n n n n n Avoid hand contact by transporting and storing parts in static-safe containers.
. . . . . . . . . . . . . . . . . . . . . . . ITEMS NEEDED FOR INSTALLATION n n n AppleTalk Interface Option Kit Nonmagnetic Phillips screwdriver LocalTalk compatible cable NOTE: The AppleTalk board is delivered with DB-9 and DIN8 connectors. Contact your Network Administrator or authorized Apple Dealer for assistance in purchasing the appropriate cables and connectors.
. . . . . . . . . . . . . . . . . . . . . . . ! WARNING: Turn the printer off and unplug the AC power cord before attempting to remove the system controller board. Failure to do so may result in an electrical shock or damage to the printer. WARNUNG: Schalten Sie den Drucker aus und ziehen Sie den Stecker des Netzteil-Adapters, bevor Sie die Systemsteuerungskarte ausbauen. Andernfalls besteht die Gefahr elektrischer Schläge oder einer Beschädigung des Druckers.
. . . . . . . . . . . . . . . . . . . . . . . STEP 2 DISCONNECT ALL CABLES FROM THE PRINTER. STEP 3 PRESS DOWN ON THE TABS TO OPEN AND LOWER THE REAR COVER. 8 Part Number 194682-001 - 08/12/94 - - Saved by digital - Rev # 13 - File Name APPLE2.
. . . . . . . . . . . . . . . . . . . . . . . STEP 4 1 2 3 LOOSEN THE SCREWS AND REMOVE THE SYSTEM CONTROLLER BOARD. 1 Thumbscrews 2 System Controller Board 3 Rear Cover STEP 5 2 1 2 3 REMOVE THE BLANK PLATE COVERING EITHER INTERFACE CONNECTOR SLOT. 1 Blank Plate 2 Mounting Posts 3 Retaining Bracket 9 Part Number 194682-001 - 08/12/94 - - Saved by digital - Rev # 13 - File Name APPLE2.
. . . . . . . . . . . . . . . . . . . . . . . STEP 6 J7 J9 PLUG THE APPLETALK INTERFACE CONNECTOR INTO LOCATION J7 OR J9 AND SECURE. 10 Part Number 194682-001 - 08/12/94 - - Saved by digital - Rev # 13 - File Name APPLE2.
. . . . . . . . . . . . . . . . . . . . . . . STEP 7 1 2 3 REINSTALL AND SECURE THE CONTROLLER BOARD AND CLOSE THE REAR COVER. 1 Thumbscrews 2 System Controller Board 3 Rear Cover STEP 8 RECONNECT ALL CABLES. 11 Part Number 194682-001 - 08/12/94 - - Saved by digital - Rev # 13 - File Name APPLE2.
. . . . . . . . . . . . . . . . . . . . . . . STEP 9 PLUG IN AND TURN ON (I) THE PRINTER. STEP 10 PRINT A HARDWARE REPORT. Using the printer control panel: 1. Press the Menu key. The printer is placed offline and in menu mode. 2. Go to the Reports menu to print a Hardware Report. 3. After printing the report, press Online (En ligne, Inlinea, En línea) to place the printer back online. 4. Verify that the AppleTalk interface is listed on the report.
