Technical data

5.1 Error Code FIPs and Messages
Table 5–1 Error Code Master Lookup Table
Display
Code
Full
Description
Brief
Definition
0103
1
Section 5.2 Top cover or door is open.
0104
1
Section 5.3 The left cover or exit side door is open.
0105
1
Section 5.4 The right cover or feed side door is open.
0300
2
Section 5.5 DC control board RAM test failure.
0301
2
Section 5.5 DC control board checksum failure.
0302
2
Section 5.5 DC control board microprocessor failure.
0305
2
Section 5.6 DC to video control board connection failure.
0312
2
0313
Section 5.7 DC control board NVRAM or PROM failure.
0401
2
Section 5.8 Main motor failure.
0600
2
0601
Section 5.9 Start of scan (beam detect) is not received.
Start of scan is late.
0700
1
Section 5.10 No paper in the bypass transport.
0701
1
Section 5.11 Upper paper out sensor detects empty cassette.
0702
1
Section 5.12 Lower paper out sensor detects empty cassette.
0703
1
Section 5.13 LCIT paper out sensor detects empty LCIT.
0705
1
Section 5.14 Upper cassette is missing or not fully installed.
0706
1
Section 5.15 Lower cassette is missing or not fully installed.
0707
1
Section 5.16 LCIT is missing or not fully installed.
0820
1
0821
0822
0823
0824
Section 6.2 Registration sensor jam, leading edge jam, or feeding
failure
0826
1
Section 6.3 Duplex refeed leading edge jam.
0827
1
Section 6.4 Duplex refeed trailing edge jam.
1
Printing stops, unless failover is selected, until operator attends to the offending problem. To
clear this error, a door sensor needs to actuate. If failover is successful, the Supplies indicator will
light and printing will continue. Press
to display the Supplies menu, which in not mentioned
elsewhere in the book.
2
Fatal error that occurs at power on and disables printer.
(continued on next page)
Display Error Code FIPs 5–3