Technical data

4
Start FIP and Nonerror Code FIPs
This chapter covers the Start FIP and the nonerror code FIPs. Figure 4–1
shows the procedure that you must follow to test, isolate, and repair the
DEClaser 3200 printer. The Start FIP and TCC procedure will test the printer,
isolate a malfunction, and direct you to a specific FIP in Chapters 4, 5, 6, or 7.
If you follow a sequence of steps to the resolution of one problem, return to the
Start FIP.
Figure 4–1 Overall Troubleshooting Flow
Section 4.1
Troubleshooting
Start FIP
Nonerror Code FIPS
Section 4.2 Noises
Section 4.3 Fuser Fan
Section 4.4 Blank, silent, or
inoperative control panel
MLO-006672
Arrive at site
Appendix C
TCC procedure
Leave the Site
Chapter 5 Display Error Code FIPs
Chapter 6 Paper Path Jam FIPs
Chapter 7 Image Defects FIPs
Start FIP and Nonerror Code FIPs 4–1