Technical data

3.4 Service Shutdown and Power-Up Procedure
5. Press
Set Up
to enter the Set Up menu. The Protocol message will
appear.
6. Press to display the selected protocol.
7. Press
>
until DEC PPL3 appears.
8. Press to select DEC PPL3. The asterisk ( ) will appear next to DEC
PPL3. Unless you save the defaults, as shown in Section 2.5, the original
protocol will return at power up.
9. Press
Online/Pause
twice. On the first press, you exit the Set Up menu to
the on line mode. On the second press, you go to the paused mode.
Service Menus and Tests 3–15