Technical data

3.3 Test Print Menu
3.3 Test Print Menu
From the Test Print menu, you can selectively exercise each section of the
simplex and duplex paper path, and read a variety of status information.
Entering the Test Print menu
1. If the printer is on line, press
Online/Pause
to display PAUSED.
2. Turn off the printer power.
3. Simultaneously press
>
and
Defaults
and turn on the printer power.
Four zeros (0000) will appear on the display.
4. Press to enter the Test Print menu.
5. Figure 3–3 shows the Test Print menu control panel display and keys.
Exiting the Test Print Menu
To terminate and leave the Test Print menu, power down the printer.
Figure 3–3 Test Print Menu
Set Up
Test
Last Page Supplies Error Online
Defaults Online/Pause
0000 0000000J
S1
*
NC
*
1
2
34567
MLO-006636
About the Test Print Menu Display The following list refers to Figure 3–3 and
describes the operation of the Test Print menu:
When an appears, press
>
to display the error message and code. The
message is a short definition of the condition. For more information, look
up the code in Table 5–1.
3–12 Service Menus and Tests