Technical data

3
Service Menus and Tests
This chapter is about the following service menus, diagnostic tests, and test
patterns:
• Section 3.1.2, 1701 Special Function Codes
• Section 3.1.3, 1701 Diagnostic Tests
• Section 3.2, 1948 Service Menu
• Section 3.3, Test Print Menu
• Section 3.4, Service Shutdown and Power-Up Procedure
Note: Special codes and power up procedures are required to invoke and access
the service menus that are discussed in this chapter. These codes are only
published in this service guide.
3.1 1701 Special Function and Test Codes
Table 3–1 and Table 3–2 list all of the codes that you can use to obtain status
information, test, and adjust the DEClaser 3200 printer.
The 1701 special functions and tests are protocol independent and will operate
if the video control board is disconnected or connected.
Some of the function codes can be entered directly without punching in the
1701 codes. Those codes are designated direct codes. See Table 3–1 for a list of
function codes.
Chapter 10 describes all adjustment procedures.
Service Menus and Tests 3–1