Technical data

2.6 Test Menu
2.6.2 Font Status Sheet
Figure 2–6 shows a portion of the font status list. The list of resident fonts can
be several pages long. Fonts are selected by escape sequences sent from the
host computer. You cannot select a font from the control panel. For additional
information about selecting fonts, consult the Digital ANSI-Compliant Printing
Protocol Level 3 Programming Reference Manual.
2.6.3 Control Representation (CR) Mode
The Control Representation or Character Dump mode is used to print out
raw (unprocessed) data or commands sent from the host computer. When the
mode is activated and the printer is on line, the printer prints all the normally
invisible control characters, such as carriage returns and line feeds.
For additional information about the Control Representation mode, consult
the Digital ANSI-Compliant Printing Protocol Level 3 Programming Reference
Manual.
2–18 Control Panel Operations and Menus