Technical data

E.3 PostScript Submenu
E.3.3 PAPER TRAY
The following values are available on the PAPER TRAY submenu of the
PostScript protocol menu.
Feature Values Description
PAPER TRAY TRAY 1
1
Feeds paper from the upper paper
cassette.
TRAY 2 Feeds paper from the lower paper
cassette.
TRAY 3
2
Feeds paper from the optional LCIT.
MANUAL/MMF Selects the manual feed mode of operation,
or the optional Multi-media feeder if it is
installed.
If you are using the manual feed tray, you
must also indicate the proper paper size.
See Section E.3.6 for information about
the paper size selections.
1
Factory default setting.
2
Displayed only if the LCIT option is installed.
E.3.4 TRAY SWITCHING
The following values are available on the TRAY SWITCHING submenu
of the PostScript protocol menu. This feature is used in conjunction with
Section E.3.5.
Feature Values Description
TRAY SWITCHING ON Enables the TRAY SWITCH SEQ feature
allowing paper tray fail-over to occur.
OFF
1
Disables the TRAY SWITCH SEQ feature.
1
Factory default setting.
Resident Protocols E–17