Technical data

E.3 PostScript Submenu

Figure E–3 shows a block diagram of the PostScript submenu. The PostScript

protocol submenu appears only when the PostScript option is installed in the

printer. See Figure 2–4 to see how this submenu connects to the Set Up menu

diagram. Use the following procedure to enter the PostScript submenu:

1. Press

Online/Pause

to set the printer to the paused mode.

2. Press

Set Up

to display the PROTOCOL text.

3. Press to display the selected protocol. DEC PPL3 is factory default.

4. Press

until the PostScript message is displayed.

5. Press to enter the selection. An asterisk (*) will appear.

6. If you wish the PostScript protocol to remain invoked through power on/off

cycles, save the user defaults, as shown in Section 2.5.

To exit from the Set up menu, press

Online/Pause

ounce or as many times

as necessary.

Note: PostScript features and values are automatically saved in NVRAM

when they are selected.

E–14 Resident Protocols