Technical data

E.2 LJ2D Submenu
E.2.1 COPIES
The following values are available on the COPIES submenu of the LJ2D
protocol menu.
Feature Values Description
COPIES 01
1
—99 Sets the number of copies to be printed.
1
Factory default setting.
E.2.2 TRAY SELECTION
The following values are available from the TRAY SELECTION submenu of
the LJ2D protocol menu.
Feature Values Description
TRAY SELECTION TRAY 1-2
1
When TRAY 1 is empty, feed paper from TRAY 2.
MANUAL Selects the manual feed mode of operation.
TRAY 1 Feeds paper from the upper paper cassette.
TRAY 2 Feeds paper from the lower paper cassette.
TRAY 3
2
Feeds paper from the optional LCIT.
TRAY 1-3
2
When TRAY 1 is empty, feed paper from TRAY 3.
TRAY 2-3
2
When TRAY 2 is empty, feed paper from TRAY 3.
TRAY 1-2-3
2
When TRAY 1 is empty, feed paper from TRAY 2.
When TRAY 2 is empty, feed paper from TRAY 3.
MMF
3
Feeds paper from the optional MMF.
1
Factory default setting.
2
Displayed only if the LCIT option is installed.
3
Displayed only if the MMF option is installed.
E.2.3 DUPLEX
The following values are available from the DUPLEX submenu of the LJ2D
protocol menu. A thorough explanation of the duplex values is beyond the
scope of this guide. See DEClaser 3200 Printer Operator’s Guide and Digital
ANSI-Compliant Printing Protocol Level 3 Programming Reference Manual for
more information.
E–10 Resident Protocols