Technical data

B.2 Print Media
B.2.4.1 Special Considerations When Printing on Labels
Observe the following requirements when printing on labels:
• Feed labels from the manual feed tray one sheet at a time.
• Be sure the carrier sheet is not exposed.
• Be sure no adhesive is exposed.
B.3 Operating Specifications
Table B–6 is copied from the DEClaser 3200 Printer Operator’s Guide and
presents a condensed version of the operational specifications.
Table B–6 DEClaser 3200 Specifications
Type: Desktop page printer
Printing Method: Electrophotographic, using laser beam scanning
Laser Power: 10 mW maximum
Resolution: 300 dpi
Printing Speed: Simplex: 13 pages/minute maximum, using A4 or Letter-
size paper
Duplex: 11 pages/minute maximum using A4 or letter-size
paper
Warm-Up Time: Less than one minute at 20°C (68°F)
Paper Cassette: Approximate capacity is 250 sheets
Letter (8 ½ in. x 11 in.)
A4 (210 mm x 297 mm)
Executive (7 ¼ in. x 10 ½ in.)
Legal (8 ½ in. x 14 in.)
Manual Feed: One sheet at a time
105 mm x 257 mm (4
1
8
in. to 10.12 in. wide)
190 mm x 364 mm (7
1
2
in. to 14.33 in. long)
Output Tray Capacity: 500 sheets (job offset facedown stacking)
Paper Weight Range
Cassette Feed:
60 g/m
2
to 80 g/m
2
basis weight
(16 lb. to 21 lb.)
Paper Weight Range
Manual Feed:
60 g/m
2
to 90 g/m
2
basis weight
(16 lb. to 24 lb.)
Host Interface: Parallel (Centronics) and serial (RS423 MMJ configuration)
(continued on next page)
B–6 DEClaser 3200 Specifications