Technical data

B.2 Print Media
• C5 (162 mm x 229 mm)
• DL or C5/6 (110 mm x 220 mm)
Envelopes must meet the same specifications as paper (see Table B–2). In
addition, the following types of envelopes cannot be used with the printer:
• Envelopes with sealing flaps that are open
• Envelopes with sealing flaps at the leading and trailing edges
• Envelopes with three or more layers of paper at the leading and trailing
edges
• Envelopes that have transparent windows
• Envelopes that have clasps, snaps, or strings
B.2.2.1 Special Considerations When Printing on Envelopes
Observe the following requirements when printing on envelopes:
• Feed envelopes from the manual feed tray one at a time.
• Print envelopes only on the front side.
• Since you need to print addresses in a particular area on envelopes, you
must specify the proper print coordinates to print the addresses.
• Printing in the 15 mm (3/5 in.) border around the envelope may cause
print quality problems with some types of envelopes. For best print quality,
do not print in this border.
B.2.3 Transparency Specifications
Table B–3 and Table B–4 contain information on the sizes and specifications of
transparencies that can be used with the DEClaser 3200 printer.
Table B–3 Transparency Sizes
Transparency Size Dimensions
A4 210 mm x 297 mm
Letter 8 ½ in. x 11 in.
B–4 DEClaser 3200 Specifications