Technical data

2
Control Panel Operations and Menus
This chapter is about the following control panel operation and functions:
• Section 2.1 identifies and describes the control panel keys, indicators, and
display. The format of the display messages is also shown.
• Section 2.2.1 describes the DEC PPL3 and PostScript operational status
messages.
• Section 2.3 describes the structure of the six main customer and service
menus, and the keys you use to move, select, and save the features and
values. See Appendix E for more Set Up menu information.
• Section 2.4 describes the Set Up menu features such as the protocol and
communications parameters.
• Section 2.5 describes the Defaults menu which you use to recall and save
factory and user defaults. Defaults are stored values for all the features of
the Set Up menu.
• Section 2.6 describes the Test menu which you use to print the
configuration and font status sheets and to turn on and off the Control
Representation mode.
2.1 Control Panel Keys and Indicators
Figure 2–1 shows the location of the DEClaser 3200 control panel indicators
and keys and Table 2–1 describes their function and operation.
Control Panel Operations and Menus 2–1