Technical data

10.6 Transfer/Separation Charger Cleaning Procedure

The transfer/separation charger should be replaced at 50,000 page intervals

and cleaned at 20,000 page intervals.

Use the following procedure to clean the transfer/separation charger:

1. Remove the transfer/separation charger, as shown in Section 9.25.

2. Close the top cover to protect the photoreceptor drum.

3. Gently clean the charge wire with a cotton swab until no toner remains on

the wire. Carefully move around the nylon wires that pass diagonally over

it.

4. Hold the charger upright in the vertical position and clean the toner from

the sawtooth comb with the cleaning brush.

Adjustments and Cleaning Procedures 10–7