Technical data

6.6 1020–1024 CLEAR PAPER PATH
6.6 1020–1024 CLEAR PAPER PATH
Description: The following error codes are displayed when the gate sensor
fails to detect the leading or trailing edge of a sheet. The gate sensor is
part of the driver board and its linkage sits across the output of the postfuser
transport .
1020 Bypass entrance feeding
1021 Upper cassette feeding
1022 Lower cassette feeding
1023 LCIT feeding
1024 Duplex refeed feeding
Figure 6–16 Gate Area Jams
MLO-006665
1
2
Troubleshooting: Use the Test Print menu (See Section 3.3 ) to feed a sheet
and identify the location of the jam. If the error code is between 1020–1023,
the sheet must be jammed before, in, or after the fusing rollers. Keep this jam
location in mind when performing the following steps:
1. Inspect the following areas for paper path damage or obstructions:
• Transfer/separation charger area
6–28 Paper Path Jam FIPs