Technical data

6.5 0830–0834 CLEAR PAPER PATH
6.5.2 0830 Manual Feeding
Description: This error code is displayed when the registration sensor fails to
detect the trailing edge or the sheet that is manually fed from the bypass slot.
Troubleshooting: Before you perform this procedure turn to Section 6.5.
1. Check for the following operator problems:
• Inserts the sheet too late.
• Fails to fully insert the sheet. The registration rollers fail to grab the
leading edge.
• Operator is inserting the wrong size paper.
2. Inspect the manual feed section of the registration transport for damage
that would drag on the sheet and also inspect the surface of the registration
rollers for dirt, glazing, or oil contamination.
3. Examine the mounting of the right side cover.
4. Swap the following:
• Registration transport
• Development unit
6–24 Paper Path Jam FIPs