Technical data

6.4 0827 CLEAR PAPER PATH
Figure 6–12 Refeed Trailing Edge Jam
MLO-006663
1
Troubleshooting: You may notice that the exit rollers chatter as they push
the sheet through the stalled refeed rollers. Since the refeed sensor detected
the leading edge of the sheet, it is probably all right. To test the refeed sensor,
use the procedure supplied in Section 6.3. Perform the following procedure:
1. Remove and inspect the upper cassette for the following:
• Is the clear plastic cassette top missing, broken, or contaminated with
adhesives?
• Are there any cuts or burs on the top of the cassette?
• Is the roof of the upper cassette slot damaged?
2. Remove the upper cassette to access the refeed pinch roller. Use you
fingers to test the pinch roller pressure. If the pinch roller pressure is
uneven, inspect and fix the pinch roller springs.
3. Test the refeed roller clutch by entering the 1701 Test code 0804. The
refeed roller clutch will energize for 10 seconds.
Paper Path Jam FIPs 6–19