Technical data

6.2 0820–0824 CLEAR PAPER PATH
4. Test the upper feed solenoid by entering the 1701 Test code 0801. When
entered, the solenoid energizes 5 times. You can hear it click and see
it operate. If the solenoid fails to operate or operates sluggishly, do the
following:
• Inspect the 2-pin connector that plugs the upper feed solenoid into
P/J39 on the lower part of the DC control board. (See Figure 6–6.)
• Swap DC control board.
• Swap upper solenoid.
5. Inspect the upper feed roller drive gears for any damage or missing teeth.
6. Clean the paper feed rollers, as shown in Section 10.5.
7. Swap the upper feed roller/clutch.
Figure 6–6 Upper Feed Solenoid Diagram
DC Control
Board
1
2
0801
P/J 39
SOI ON (L) +24 VDC
Upper Feed
Solenoid
+24 VDC
P/J 38
P/J 39
MLO-006656
16-Pin
6.2.4 0822 Lower Cassette Feed Failure
Note: Before performing the following FIP steps, make sure you have
completed all the steps in Section 6.2 at at the beginning of this procedure.
Description: This message is displayed when a misfeed occurs when feeding
from the lower cassette. The sheet never reached the registration sensor in
time. The error occurs after a feed attempt.
6–10 Paper Path Jam FIPs