Specifications

The ULTRIX Operating System, Version 4.5 SPD 26.40.32
Processor
VAX 9000-110
2
VAX 9000-210
VAX 9000-410
(single XMI)
VAX 9000-310
2
VAX 9000-410
(2 XMIs)
VAX 9000-320
2
VAX 9000-420
LG31 LG31 LG31
LJ250 LJ250 LJ250
LN03
LN03R
LN03S
LN03
LN03R
LN03S
LN03
LN03R
LN03S
LQP02
LQP03
LQP02
LQP03
LQP02
LQP03
LVP16 LVP16 LVP16
DEClaser 1100
/1150
17
DEClaser 1100
/1150
17
DEClaser 1100/1150
17
DEClaser 2100
/2150
17
DEClaser 2100
/2150
17
DEClaser 2100/2150
17
DEClaser 2200
/2250
17
DEClaser 2200
/2250
17
DEClaser 2200/2250
17
DEClaser 3200
/3250
17
DEClaser 3200
/3250
17
DEClaser 3200/3250
17
Asynchronous VT100 Series VT100 Series VT100 Series
Terminals VT200 Series VT200 Series VT200 Series
VT300 Series VT300 Series VT300 Series
VT420 VT420 VT420
DECmate II/III DECmate II/III DECmate II/III
Rainbow 100B
Rainbow 100+
Rainbow 190
Rainbow 100B
Rainbow 100+
Rainbow 190
Rainbow 100B
Rainbow 100+
Rainbow 190
PRO 350/380 PRO 350/380 PRO 350/80
VAXmate VAXmate VAXmate
Notes:
1
Letter D = Data device only.
Letter L = Valid ULTRIX load device.
2
The VAX 9000 CPU must be at hardware Revision Level K or greater.
3
The KDB50 must be at microcode Revision Level K or greater.
5
The DEBNI is a high-speed BI-to-Ethernet adapter intended as a replacement for the existing DEBNA.
6
The TA90 must be connected to an HSC running V3.90A or later.
7
The TA90E must be connected to an HSC running V5.0 or later.
9
The asynchronous and general purpose parallel interfaces as a printer port in DMA mode of the DMB32 are supported.
11
Four HSCs per CI star couplers are supported.
12
Supported configurations are four CIXCDs on one XMI or two CIXCDs on each of the two XMIs. The CIXCD must be at
revision 2.2
13
The TA91 must be connected to an HSC running V4.0 or later.
14
The TA91 is supported in KDM70 Software V3.0.
15
A maximum of three KDM70s is supported on one XMI system. For a dual XMI system, the supported configuration is two
KDM70s on one XMI, and three KDM70s on the second XMI.
47