Owner`s manual

PATHWORKS for DOS software supports the use of Expanded Memory Spec-

ification (EMS) applications that are Version 4.0 compliant. Every ef-

fort has been made to ensure that the software adheres to the EMS, Ver-

sion 4.0 specification. However, individual applications may have in-

terpreted the specification differently and, therefore, may not func-

tion in Digital's PATHWORKS for DOS network environment.

PATHWORKS for DOS software is written to the NDIS Version 2.0.1 in-

terface. Every effort has been made to ensure that the software ad-

heres to the NDIS, Version 2.0.1 specification. However, individual

vendors' interpretation of the specification may vary and therefore

the application may not function in Digital's PATHWORKS for DOS net-

work environment.

Digital-developed NDIS drivers, for Digital EtherWORKS, EtherWORKS 3,

or Token Ring controllers, are fully supported.

Digital's implementation of the NDIS standard is intended to allow users

a greater choice of Ethernet and Token Ring controllers. This imple-

mentation is not intended to support the simultaneous operation of the

PATHWORKS for DOS product and other vendors' networking products.

The following base systems are only supported with the ROM BIOS lev-

els listed in the PC Interoperability Guide. Refer to CompuServe or

contact your local Digital representative for more information about

the PC Interoperability Guide.