Owner`s manual

o Toshiba(R) DOS V3.3 (R3C90US), V4.01 (R4A15US), V5.0
o ZDS DOS V3.3+, V4.0, V4.01, V5.0
The base systems listed in the Supported Base Systems table at the end
of this document are supported when using operating system software
supplied by the same vendor as the system unit itself or with Microsoft
DOS. Digital recommends using the operating system software supplied
by the PC vendor to ensure complete interoperability.
Note: If using DOS, Version 4.0, Digital recommends upgrading to DOS,
Version 4.01 where available; enhancements associated with these re-
leases ensure interoperability with PATHWORKS for DOS.
Note: If using Microsoft DOS, Version 6.0, Memmaker Utility, Digital
recommends using its Custom Mode Setup.
Server Support
The following versions of the PATHWORKS server software products are
supported in conjunction with PATHWORKS for DOS, Version 4.1B client
software when used in a server/client environment:
o PATHWORKS for VMS V4.1, V4.1-1, V4.1-2, V4.2, V4.2-1 (SPD 30.50.xx)
o PATHWORKS for ULTRIX V1.0, V1.1, V1.2 (SPD 32.44.xx)
o PATHWORKS for OS/2(R) V1.1, V2.0, V2.0B Server Software (SPD 55.24.xx)
o PATHWORKS for SCO[TM] UNIX(R) V1.0 (SPD 42.85.xx)
OPTIONAL SOFTWARE
PATHWORKS for DOS (TCP/IP) V2.0 is required software if the user re-
quires TCP/IP network transport support (SPD 33.45.xx).
LAN Manager V2.1 for PATHWORKS for DOS is required software if the user
requires LAN Manager V2.1 and/or NetBEUI transport support. The me-
dia kit is available separately (QA-0TLAG-HB (low-density 3.5-inch flop-
pies) or -H7 (high-density 5.25-inch floppies)).
PATHWORKS for DOS (NetWare(R) Coexistence) V1.1A is required software
if the user requires PATHWORKS for DOS and NetWare client software to
run concurrently (SPD 34.76.xx.)
12