Owner`s manual

The "Autosense Mode" of the Zenith(R) Data Systems Enhanced EGA card (Z-

449) is incompatible with PATHWORKS for DOS and must be disabled. Re-

fer to the Zenith Owner's Manual for more information.

HARDWARE REQUIREMENTS

Systems, components, and peripherals as specified in the System Sup-

port Addendum (SSA 55.07.13-x) are supported.

PATHWORKS for DOS, Version 4.1B has been tested on several supported

configurations (refer to SSA 55.07.13-x). If a customer problem with

PATHWORKS for DOS software can be reproduced by the customer on one

of these supported configurations, Digital will work the problem to

resolution on these supported configurations. If the customer prob-

lem cannot be reproduced by the customer on one of these supported con-

figurations, it will be the responsibility of the customer to resolve

the issue.

SOFTWARE REQUIREMENTS

Server Software

If the PATHWORKS for DOS software is used in a server/client environ-

ment, at least one of the following server products are required:

o PATHWORKS for VMS (SPD 30.50.xx)

o PATHWORKS for ULTRIX (SPD 32.44.xx)

o PATHWORKS for OS/2 server software (SPD 55.24.xx)

o PATHWORKS for SCO UNIX (SPD 42.85.xx)

Refer to the System Support Addendum (SSA 55.07.13-x) for availabil-

ity and required versions of prerequisite/optional software.