Owner`s manual

therefore, some applications may not function in Digital's PATHWORKS
for DOS network environment with the Task Switcher enabled.
Installation and Configuration Utilities
PATHWORKS for DOS includes an automated installation procedure to in-
stall the client software to the PATHWORKS for VMS (on VAX systems)
or ULTRIX server system or to the client's hard disk.
A DOSLOAD utility is provided to simplify management of various ver-
sions of the DOS operating system to the PATHWORKS for VMS or ULTRIX
server system.
PATHWORKS for DOS includes a configuration utility, NETSETUP, which
guides the user through the configuration process using a series of
screen selections and online Help. The user's input to the procedure
establishes the PATHWORKS for DOS node's network configuration and copies
the startup software to the key disk. NETSETUP has three operational
modes depending upon the configuration choices desired. In many cases,
defaults can be selected for fast and easy configuration.
PC DECwindows Motif
PC DECwindows Motif is an MS-DOS application. It implements an X server
that uses the industry-standard Release 4 of the X Window System, Ver-
sion 11 (X11), protocol. An X Window System application, such as a DECwin-
dows application, executing on a remote OpenVMS or ULTRIX system with
DECnet may be displayed on and receive keyboard and mouse input from
the personal computer.
Only one transport, either DECnet or TCP/IP, is supported at any one
time regardless of the number of applications running in various win-
dows.
PC DECwindows Motif is supported only on Intel 80286, 80386, and 80486
machines listed in the System Support Addendum (SSA 55.07.13-x).
Use:
o DWDOS286 for Intel systems with 80286, 80386, and 80486 processors
20