User guide

Maintenance
• Close the top cover and press the Install Cartridge button on the operator
panel.
The print head carriage moves to the print head storage position, at the right
of the carriage shaft.
CAUTION: If you have set the printer to operate with a color print head
(print head selection lever towards the inside of the printer) and the print
head you have inserted is a monochrome one, the print head carriage will not
return to its rest position and the On-Line and On indicators will flash in
sequence (On-Line twice followed by On once). You must change the
position of the print head selection lever. This lever will only move if the print
head carriage is in the loading position.
If the indicators flash with the sequence On-Line five times followed by On
once, this indicates that the print head inserted is not compatible with the
currently loaded printer driver options.
If you have problems inserting the print head, always remove it completely and
repeat the entire insertion operation, checking the following:
• Make sure the print head carriage is in the print head loading position.
• Check that the print head chamber is clean and free of foreign bodies.
• Check that the print head selection lever position is compatible with the type
of print head inserted.
• NEVER force the print head into the chamber.
4-5