User guide

Operating the Printer
Inserting a Document Manually
To insert a document manually:
• With the printer switched on, position a sheet of paper on the paper guide,
aligning it with the corresponding guide at the left edge of the insertion slot.
Envelopes should be aligned with the guide on the right of the insertion slot.
They should be placed with their short side against the guide and with the
printing side face up and the sealing flap face under.
• Push the paper in until it stops against the feed rollers.
Manually inserting the paper
CAUTION: If you intend to insert single documents systematically, you must
first switch off the printer, set the selector C in its ON position and then
switch the printer on again (see the section entitled "Selector Switches Set-Up
Procedure" in Appendix C).
The document / envelope must not be crumpled or torn, otherwise it may jam
or even not be inserted.
3-7