User guide

Getting Started
Then follows a list of the current feature settings (Set-Up), with a graphic
representation of the selector switches positions (small black rectangles: OFF
position, large black rectangles: ON position).
The currently selected character set table appears at the bottom of the test.
Second and Subsequent Pages
Samples of the resident (and, if present, optional) fonts in portrait and / or
landscape with all their attributes (see the section entitled "Selector Switches
Set-Up Procedure" in Appendix C and the section entitled "Resident Fonts" in
Appendix B).
Color Print Head
If you have inserted a color print head, the print test will require one sheet of
paper. The print test will consist of three graphic samples (one for each of
basic colors in the print head) from which you can check the correct operation
of each group of nozzles.
• Check that the colored bands are bright and consistent in hue.
NOTE: In case of problems, refer to the Chapter 5 "Troubleshooting".
2-17