User guide

Getting Started
Once the test is completed and the last sheet of paper expelled, the printer will
go automatically into ON LINE condition.
Check the print quality of the test, making sure that all the characters are
clearly defined and complete.
NOTE: If any problem occurs, see Chapter 5 "Troubleshooting" of this
manual for corrective actions.
Printer Self Test Contents
Monochrome Print Head
If you have inserted a black print head, the print test will require at least four
sheets of paper (see the examples on the pages which follow).
• Check that all the characters are clearly defined and complete.
First Page
The first line of the print test contains information on the printer status:
- At the left hand margin: the resident (or selected) emulation
- At the right hand margin: the name, date of issue and level of the printer
firmware.
The second line of print test indicates the print head type and is followed by the
print head test which allows you to check whether any dots are missing. A list
of defective nozzles (if any) is indicated after the test. The defective nozzles are
identified by their number after the text: "Nozzles test Fail on". Otherwise, the
text "Nozzles test Pass" is printed.
NOTE: If there are defective nozzles, see the section entitled "Priming the
Monochrome Print Head" in Chapter 4 "Maintenance" for the possible
solutions to this problem. Then repeat the print test.
2-16