User guide

Getting Started
• With the electrical contacts facing towards the front of the printer, insert
the print head in its carriage by:
1. Pushing it down into the carriage
2. Pulling it towards the front of the printer until it clicks
21
Inserting and blocking the print head
If the print head is correctly installed and matches the selection lever
position, the indicators stop flashing.
• Close the top cover and press the Install Cartridge button on the operator
panel.
The print head carriage moves to the print head storage position, at the right
of the carriage shaft.
If you have problems inserting the print head:
- Make sure the print head carriage is in the print head loading position.
- Check that the print head chamber is clean and free of foreign bodies.
- Check that the print head selection lever position is compatible with the type
of print head inserted.
- NEVER force the print head into the chamber.
CAUTION: If you have problems when inserting the print head, always
remove it completely and repeat the entire insertion operation.
2-14