User guide

Getting Started
If the lever position does not match the print head type, the print head will
not return to its rest position and the On-Line and On indicators will flash
in sequence (On-Line twice followed by On once).
• Open the sealed print head container.
• Remove the print head from its container, holding it by the casing, at the
opposite side from the protective tape.
CAUTION: Do not touch the electrical contacts or sit the print head on them.
Removing the print head from its container
•
Still holding the print head casing, remove the transparent protective tape,
pulling its tab end in the direction indicated by the arrow.
CAUTION: Do not touch the printing nozzles or sit the print head on them.
Removing the protective tape
2-13