User guide

Getting Started
Installing the Print Head
The monochrome print head has an "ink detection" sensor which guarantees
optimum printing quality by allowing the timely replacement of the print head
or ink cartridge.
The following procedure applies to both print heads (monochrome and color).
To install a print head:
• Switch on the printer.
CAUTION: Before installing a print head, check that the print head selection
lever matches the print head type you intend to insert.
• Lift up the top printer cover.
• Press the Install Cartridge button on the operator panel.
The print head carriage moves to the print head loading position, at the
centre of the carriage shaft (the On and On-Line indicators start flashing
alternately).
• Move the selection lever (located on the right side of the inside paper guide)
to the position that matches your print head type, according to the
indications engraved near the lever.
BLACK
COLOR
Print head selection lever
2-12