User guide

Getting Started
Connecting to the Power Outlet
CAUTION: BEFORE connecting the printer to the power outlet and / or
switching it on, read all the following points carefully.
WARNING: The manufacturer declines all responsibility for accidents to
persons or damage to the printer arising from the non-observance of the
following procedure.
CAUTION: Make sure the power outlet supplies the voltage indicated on the
electrical data plate on the base of the printer.
WARNING: If the electrical data plate indicates a different voltage, call your
dealer immediately. DO NOT, UNDER ANY CIRCUMSTANCES, CONNECT
OR SWITCH ON THE PRINTER.
Electrical data plate
•
Make sure that the plug on the power cable is of the type accepted by the
power outlet you intend to use; if it is not, call your dealer.
Do NOT attempt to change the plug yourself.
• Make sure the printer is switched OFF BEFORE plugging into the power
outlet socket (see "Switching On the Printer" section).
2-10