User guide

Emulation and Character Sets
The character assignment tables for the resident sets are given at the end of this
appendix.
The character sets can be selected using the printer Set-Up procedure (see
Appendix C) or using command codes (see the following table). The Open
bracket, in the ESCAPE sequence, indicates the selection of the primary
character set; the Close bracket indicates the selection of the secondary
character set.
Character Set
Command Codes
Primary Set Secondary Set
CP 437 - International ESC ( 10 U ESC ) 10 U
Roman-8 ESC ( 8 U ESC ) 8 U
PC 8 Denmark/Norway ESC ( 11 U ESC ) 11 U
CP 850 (Multilingual) ESC ( 12 U ESC ) 12 U
ECMA 94 Latin 1 ESC ( 0 N ESC ) 0 N
ISO 4 - United Kingdom ESC ( 1 E ESC ) 1 E
ISO 21 - Germany ESC ( 1 G ESC ) 1 G
ISO 69 - France ESC ( 1 F ESC ) 1 F
ISO 15 - Italy ESC ( 0 I ESC ) 0 I
ISO 60 - Norway 1 ESC ( 0 D ESC ) 0 D
ISO 61 - Norway 2 ESC ( 1 D ESC ) 1 D
ISO 11 - Sweden Names ESC ( 0 S ESC ) 0 S
ISO 10 - Sweden ESC ( 3 S ESC ) 3 S
ISO 17 - Spain ESC ( 2 S ESC ) 2 S
ISO 6 - ASCII ESC ( 0 U ESC ) 0 U
ISO 2 - IRV ESC ( 2 U ESC ) 2 U
ISO 16 - Portugal ESC ( 4 S ESC ) 4 S
ISO 14 - JIS ASCII ESC ( 0 K ESC ) 0 K
Legal ESC ( 1 U ESC ) 1 U
CP 860 - Portugal ESC ( 33 I ESC ) 33 I
D-4