User guide

Printer Controlling
Optional Serial Interface
Serial Interface selector switches (numbered 1 to 5) define the setting for the
optional serial interface. ONLY the switch(es) corresponding to the setting(s)
required (see following table) should be raised; the others MUST remain down.
Example: factory settings with all five selectors in OFF position (2400 baud,
no parity, hardware handshake).
1 2 3 4 5 Serial Interface
Baud rate : 2400
Baud rate : 9600
Baud rate : 19200
Baud rate : 38400
Parity : none
Parity : even
Parity : odd
Handshake : hard
Handshake : soft
NOTE: See the Appendix A for details about selecting the connection
parameters within Windows environment with the serial interface option.
Reserved
The last three selectors switches on the selector bar (1 to 3) are not currently
assigned to any parameters in the resident emulation.
NOTE: The position of these selectors should NOT be altered.
C-20