User guide

Printer Controlling
NOTE: To print up to 66 lines of text on a Letter page (70 lines on a A4
page), set both D and E selector switches ON.
Paper Size
Paper Size selector switches (numbered 1 to 3) define the paper size to be used.
To select a paper size other than the factory setting (Letter), ONLY the
switch(es) corresponding to the paper size required (see following table) should
be raised; the others MUST remain down.
Example: to select Envelope, set switches 2 and 3 ON and switch 1 OFF.
1 2 3 Paper Size
A4
Letter
Legal
Envelope
Other * (max. 462 mm)
* Other - to select any of the other paper sizes, use the command code ESC & l n A, Appendix E
Character Sets
Character Sets switches (numbered 1 to 6) define the character set to be used.
To select a character set other than the factory setting (CP 437 - International),
ONLY the selector(s) corresponding to the character set required (see following
table) should be raised; the others MUST remain down.
Example: to select Legal character set, set switches 2, 5 and 6 ON and
switches 1, 3 and 4 OFF.
C-17