User guide

Printer Controlling
NOTE: If an optional font card is used, selector 1 must be set ON, then,
depending on which of the fonts in the card is to be selected, set switches 2 to 6
accordingly (see Appendix B and the documentation supplied with the specific
font card). The fonts can also be selected using command codes (see
Appendix E).
Print Attributes and Other Features
The features assigned to selectors A to J, indicated on the template on the
inside of the top cover, are the alternative feature values. I.e., they are the
values implemented when the corresponding selector switch is set in its ON
position.
Switch Feature OFF
ON
A Text Width Normal
Compressed
B Print Quality Letter Quality
Draft
C Paper Insertion Paper Tray
Manual
D Perforation Skip * Enabled
BOF = 12.7 mm
TOF = 12.7 mm
Disabled
BOF = 12.7 mm
TOF = 0 mm
E Text Scale Mode ** Disabled
Enabled
F Graphic Density *** 75 dpi
300 dpi
G Automatic Line Feed Disabled
CR = CR : only
carriage return
Enabled
CR = CR + LF : carriage
return + line feed
H Ink Save Mode (Text) Disabled
Enabled
I Reserved
J Reserved
* Perforation Skip - see also command code ESC & l n L, Appendix E
** Text Scale Mode - see also command code ESC & k 6 W, Appendix E
*** Graphic Density - see also command code ESC * t n R, Appendix E
C-16