User guide

Printer Controlling
Programmable Features
The 33 switches are assigned to the programmable features singly, or in some
cases, in groups (for Font, Paper, Character Set). Starting from the left, the
switches are designated as follows:
- A group of six switches (numbered 1 to 6) which select the font
- Eight selectors, indicated alphabetically (A to H), which select individual
print attributes and features
- Two switches which are reserved
- A group of three switches (numbered 1 to 3) which select the paper size
- A group of six switches (numbered 1 to 6) which select the character set
- A group of five switches (numbered 1 to 5) which select the optional serial
interface characteristics
- A group of three switches (numbered 1 to 3) which are reserved
Resident Emulation (HP DeskJet 500)
In the following section, factory settings are displayed in bold-face type within
the tables and switches ON positions are identified by gray cells.
Fonts
The first six selectors define the print font to be used. To select a resident font
other than the factory setting (Courier Upright Portrait 10 cpi / 12 pt), ONLY
the selector switch(es) corresponding to the specific font required (see
following table) should be raised; the others MUST remain down.
Example: to select Times Nordic Italic PS / 12 pt, set switches 3 and 6 ON
and switches 1, 2, 4 and 5 OFF.
NOTE: For information on the resident and optional fonts available, and their
characteristics, see Appendix B.
C-14