User guide

Fonts
Line Draw
This font is available ONLY in portrait orientation with 12 cpi spacing, 12 dot
height and medium stroke weight.
The standard print test contains a print sample (the default character set) of all
the resident fonts.
Before loading soft fonts in your printer, you must expand the memory
capacity, using the optional 256 KB memory card (or standard PCMCIA Type
1 memory cards).
NOTE: The instructions for the installation and use of the optional font cards
and soft fonts are supplied with the individual options.
Two independent fonts, primary font and secondary font , are always active
in the printer. Their characteristics can be modified independently, one at a
time. You can alternate between the currently active primary and secondary
fonts using the command codes "SI" and "SO" (see Appendix E "Command
Codes").
B-4