Technical data

D.9 Page Sizes
In the CPS V4.1 product, the following page sizes did not exist or were not
correctly interpreted. The DCPS product defines and interprets these correctly.
A6
C
D
7x9
7_envelope
10x14
11x14
PostCard
D.10 Selecting Separator Pages from Alternate Tray
To select job separator pages from an alternate tray using the DCPS software,
define the following system logical:
$ DEFINE /EXECUTIVE_MODE /SYSTEM DCPS$queuename_SEPARATOR_TRAY number
Note that number is a valid tray number for the printer served by that queue,
and is printer-specific. Refer to your printer documentation to obtain the
correct value.
The following are the values for Compaq and DIGITAL printers:
Table D–1 Tray Number Values
Printer Tray
Tray
Number Default Optional
Compaq Laser Printer LN16
upper 0 ♦
lower 1 ♦
multipurpose 3 ♦
(continued on next page)
D–4 DECprint Supervisor (DCPS) and DECprint Printing Services Software (CPS)