Technical data

Table B–1 (Cont.) DCPS Logical Names
Logical Name Acceptable Values Meanings and References
Logical names that provide information to DCPS
DCPS$qn_DEVICE_NAME
4
string Actual device name associated with
the queue when name is too long for
INITIALIZE/QUEUE/ON qualifier
(and SHOW QUEUE/FULL lists
‘‘DCPS$’ as the device instead);
Section 3.3.2
DCPS$qn_IGNORE_UNKNOWN_
USER
1 Disable unknown user error when
username not found in UAF;
Section 3.4.5
DCPS$qn_INTERRUPT_
WHEN_BUSY
1 Disable wait for serial printers to be
‘‘not busy’’; Section 3.4.2
DCPS$qn_NO_SYNC 1 Disable usual synchronization on
printers other than PrintServer
printers; Section 3.4.3
DCPS$qn_OLD_ANSI_PAGE_
SIZES
1 Use old (pre-V1.1a) vertical spacing
for A4 size in ANSI translator;
Section 3.4.6
DCPS$qn_PARAMETER
4
string Default queue parameters;
Section 3.3.4
DCPS$qn_SEPARATOR_TRAY number Tray number to take job burst and
flag pages from; Section 6.2.3
DCPS$qn_STALL_TIME delta time Timeout before declaring a printer
stalled; Section 5.12
DCPS$qn_SUPPRESS_
JOBTRAILER
1 Disable printing of job trailer;
Section 6.2.2
PSM$ANNOUNCE string String which prints on separator
pages; Section 6.4
Logical names that return information from DCPS
DCPS$qn_PID Process ID of DCPS symbiont
controlling the queue; Section 5.8
DCPS$qn_STALLED Reason for queue being stalled;
Section 5.12
4
Defined by DCPS$EXECUTION_QUEUE.COM
Logical Names used by DCPS B–3