Technical data

DCPS$_CONTERMINATED, Connection abnormally terminated

Explanation: This message occurs when communication to the LAT node

is interrupted. This results in a stopped queue. Check the following:

• Power is supplied to the LAT device.

• Printer port is not logged off.

• All connections from LAT device to the Ethernet cable are working.

DCPS$_CONTIMEOUT, Connection timed out, server not available, or

incorrect server name speciﬁed

Explanation: This message occurs when the server name is not

recognized. This problem may indicate the collision of user terminal

space and the printer port.

Verify that the server name connected to the printer port is correct.

Compare the server name speciﬁed in the LAT conﬁguration ﬁle

LAT$SYSTARTUP.COM with the server name on the LAT device.

LAT$SYSTARTUP.COM should contain a line similar to the following:

SET PORT LTAxxx:/NODE=server_name/PORT=port_name/QUEUE/APPLICATION

Use the SHOW PORT command to ﬁnd the server name associated with

the printer port:

Local> SHOW PORT port-name

DCPS$_LRJACCESSDENIED, Access denied

Explanation: This message usually occurs when the group code speciﬁed

in LAT$SYSTARTUP.COM does not match one of the groups on the LAT

device connected to the printer. Thus, the printer software does not have

access to the LAT port. The LAT conﬁguration ﬁle LAT$SYSTARTUP.COM

should contain a line similar to the following:

SET NODE/GROUP=group-list/ENABLE

Compare groups, /GROUP=group-list, set in LAT$SYSTARTUP.COM with

those set on the LAT device (SHOW PORT command).

DCPS$_LRJDELETED, Queue entry deleted by server

Explanation: This message occurs when someone manually terminates

the connection to the LAT device.

DCPS$_LRJILLEGAL, Illegal request parameter

Explanation: This message indicates that an internal LAT error has

occurred. Submit a Software Performance Report.

11–12 Troubleshooting Procedures