Technical data

10.21 HP XL300 Printer
10.21.1 Communication Problem
If a file printed to the XL300 printer contains multiple userdata messages
that are returned in quick succession, some messages may be lost, and
others returned incorrectly. Also, occasionally, messages that the DECprint
Supervisor wants returned to it will get garbled. This will result in spurious
messages to the user’s terminal (if /NOTIFY is set). Otherwise, the job prints
correctly.
10.22 Lexmark Optra Rt+ Printer
10.22.1 Tray Linking and INPUT_TRAY
If tray linking is enabled by the printer console, the linked trays cannot be
selected individually using the INPUT_TRAY parameter. Specifying any linked
tray in the INPUT_TRAY parameter causes the printer to select among the
linked trays in accordance with its own algorithm.
10.23 Lexmark Optra S
10.23.1 Problems Starting Queues
Some models in this series may not allow DCPS jobs to start. To resolve
this, either set the printer to PostScript mode or suppress DCPS’s PostScript
synchronization. See the DECprint Supervisor for OpenVMS Release Notes or
the OpenVMS System Manager’s Reference Manual for more information.
10.24 Tektronix Phaser
10.24.1 Printer Configuration Settings
You must change the following AppSocket settings when using Phaser printers
with DCPS:
Table 10–3 Tektronix Phaser Configuration Settings
AppSocket Setting Value
Interpreter PostScript
Filtering Interpreter-Based
10–14 Printer-Specific Information