Technical data

10.16 HP LaserJet 4SiMX Printer
10.16.1 Incorrect Sheet Count on Duplex Jobs
The HP LaserJet 4SiMX printer exhibits the same behavior with sheet count
as mentioned in Section 10.14.2.
10.17 HP LaserJet 5M Printer
10.17.1 Problems Selecting an Input Tray
DCPS may ignore explicit INPUT_TRAY parameter values for the HP LaserJet
5M printer, instead utilizing paper from another input tray. DCPS may also
report that TRAY_1 is not available, even though the tray is a standard tray,
when tray 1 is empty.
Both classes of problems are related to the printer attempting to select an
alternate input tray if the desired tray is empty or otherwise not satisfactory.
To avoid these problems, use the HP 5M console to specify that tray 1 is a
‘‘cassette’’ and to lock out all but one of the available input trays. Refer to the
printer’s user manual for more information.
10.17.2 Incorrect Sheet Count on Duplex Jobs
The HP LaserJet 5M printer exhibits the same behavior with sheet count as
mentioned in Section 10.14.2.
10.18 HP LaserJet 5SiMX Printer
10.18.1 Job Trailer Pages Print in Next Bin
If the network manager has placed the mailbox bins into ‘‘job separator mode’’
using the administration software supplied with the printer, the DCPS job log
and trailer pages print in the next bin, separated from the rest of the job.
10.18.2 Tray Is Not Available Due to Lack of Memory for Loaded Paper
If an input tray is loaded with a paper size that cannot be printed with the
current memory configuration, DCPS reports the tray as not available. (Refer
to the HP5SiMX users’s guide for memory requirements.)
10.18.3 Duplex Not Supported Due to Lack of Memory for Loaded
Paper
If an input tray is loaded with a paper size which cannot be printed in duplex
mode with the current memory configuration, DCPS reports that duplex is not
supported. (Refer to the HP5SiMX users’s guide for memory requirements.)
10–12 Printer-Specific Information