Technical data

10.9.2 Incorrect Sheet Count
The sheet count reported on the job trailer page and in the OpenVMS
accounting file may be several sheets too few due to a limitation with the
LN17ps printer. There is no known workaround.
10.9.3 Downloading and Deleting Fonts
You may download or delete fonts from the LN17ps printer’s optional
hard drive using the FONT_DOWNLOADER.COM procedure described in
Appendix C.
10.9.4 Colored Separator Pages and Tray Switching
The LN17ps can switch between input trays when a specified tray becomes
empty. By default, tray switching is disabled. If you currently specify colored
separator pages by using the DCPS$queuename_SEPARATOR_PAGE logical,
you may want to ensure that tray switching is disabled.
You disable tray switching from the printer console, under the PostScript
menu. See the LN17ps User Guide for more information.
Use one of the following PostScript tray numbers as the value of the
DCPS$queuename_SEPARATOR_PAGE logical:
0 Main tray
1 Front tray
2 Lower 1 tray
3 Lower 2 tray
10.10 DIGITAL Laser Printer LN20
10.10.1 Incorrect Sheet Count
The sheet count reported on the job trailer page and in the OpenVMS
accounting file is incorrect due to a limitation with the LN20 printer. There
is no known workaround. The LN20 has, however, an accounting feature that
can be used to track printer utilization.
10.11 DIGITAL Laser Printer LN40
10.11.1 Incorrect Sheet Count
The sheet count reported on the job trailer page and in the OpenVMS
accounting file is incorrect due to a limitation with the LN40 printers. There
is no known workaround. The LN40 has, however, an accounting feature that
can be used to track printer utilization.
Printer-Specific Information 10–9