Service manual

1-10 DECcolorwriter 1000
1 General Information
Front panel
The front panel consists of seven LEDs indicating the printer's normal operating status.
POWER: Illuminates to indicate that the power supply is generating +5 VDC.
READY: On indicates the printer is idle. Blinking indicates the printer is receiving and
processing data.
COVER: On indicates either the front or top cover is open.
TRANSFER ROLL (RIBBON): On indicates the transfer roll is low and will soon
need to be replaced. Blinking indicates the transfer roll is empty.
MEDIA: On indicates the paper tray is empty. Blinking (together with the JAM light)
indicates the wrong size paper is installed in the paper tray.
JAM: On indicates a jam has occurred inside the printer. Blinking indicates a
paper-pick error has occurred.
ERROR: On indicates a hardware engine error has occurred. Blinking indicates a data
processing error has occurred with the image processor board.
Figure 1-6. DECcolorwriter 1000 front panel
ERROR JAM RIBBON COVER
READY
POWERMEDIA