Service manual

D-2 DECcolorwriter 1000
D Test Pattern Generator
To use the Test Pattern Generator, do the following:
1. Select a test pattern to be printed using the Test Pattern Generator's five DIP
switches. The following tables lists the available test patterns.
2. Plug the Test Pattern Generator onto the printer's parallel port. You do not
have to turn the printer off; you can plug-in the Test Pattern Generator “hot.”
Figure D-1. Plugging the Test Pattern Generator into the printer's
parallel port
8699-78
PHASER 200i
MODEL 4681 PXi
Service
Power Up
2
3
Diagnostics
Variable
4
1200
Baud Rate
Off
On
Blue Adj.
Run
5
Skip
Start Job
Run
Reset
1
Off
6
On
Press Adj.
Serial
(RS-232)
Parallel
Status
Ethernet®
Ethernet Address
Not Installed
SCSI Disk
LocalTalk®
Test pattern
generator
attach to
parallel port
Start
button
Pattern
select
switches
12345
12345
On