Service manual

Service Manual 9-15
Checks and Adjustments 9
Use test pattern 5 to check and make the thermal head temperature adjustment.
↑ indicates the switch is on.
Table 9-5 Setting thermal head temperature (based on thermal head
resistance)
Dip Switches
2-1 2-2 2-3 2-4 Resistance (Ω) printed on thermal head
1315
↑ 1316 to 1345
↑ 1346 to 1375
↑↑1376 to 1405
↑ 1406 to 1435
↑↑1436 to 1465
↑↑ 1466 to 1495
↑↑↑1496 to 1525
↑ 1526 to 1555
↑↑1556 to 1585
↑↑1586 to 1615
↑↑↑1616 to 1645
↑↑ 1646 to 1675
↑↑ ↑1676 to 1705
↑↑↑ 1706 to 1735
↑↑↑↑1736