Service manual

Service Manual 9-3
Checks and Adjustments 9
↑ indicates switch is on.
Table 9-1 Selecting self-test print patterns
Dip switches
1-4 1-5 1-6 1-7 Print pattern and tests Color
Test Pattern 0: Speckle detect CMY
↑ Test Pattern 1: Rag patch (full step) CMY
↑ Test Pattern 2: Bridging detect (orange) MY
↑↑Test Pattern 3: Composite black fill (C, M, Y) CMY
↑ Test Pattern 4: 25% fill CMY
↑↑Test Pattern 5: Dither CMY
↑↑ Test Pattern 6: Wrinkle 1 CM
↑↑↑Test Pattern 7: Rag patch (half step) CMY
↑ Test Pattern 8: Wrinkle 2 CMY
↑↑Test Pattern 9: Bridging detect (3 color) CY
↑↑Test Pattern A: Wrinkle detect (trucks) CMY
↑↑↑Test Pattern B: Wrinkle detect (memo) CMY
↑↑ Test Pattern C: Check/inspection (full step) CMY
↑↑ ↑Test Pattern D: Check/inspection (half step) CMY
↑↑↑ Test Pattern E: Continuous print mode 1 CMY
↑↑↑↑Test Pattern F: Continuous print mode 2 CMY