Service manual

Service Manual 9-1
Chapter
9
Checks and Adjustments
This chapter describes how to make mechanical and electrical adjustments to the
DECcolorwriter 1000 print engines. It also describes how to maximize print quality.
Required tools summary
n Magnetic tip screwdriver -- 8.5 ins.
n Extension tip
n #1 POSIDRIV® tip
n #2 POSIDRIV® tip
n Tweezer
n Hex wrench kit
n G-311S lubricating grease
n Antistatic mat
n Needle-nose pliers
n
7
/
32
-inch nutdriver
n Small flat-blade screwdriver
n Flat-blade screwdriver
n Volt-ohm-meter such as a
Tektronix DM250 Multimeter
n Magnifying lens Such as
Micronta (Radio Shack) Cat# 63-851