Service manual

8-36 DECcolorwriter 1000
8 FRU Disassembly/Assembly
5. Disconnect the power supply wiring harness leading to the printhead. Cut the
cable ties securing the harness in place.
6. Slide the card cage and power supply out the rear of the print engine. As you
slide the card cage out you can disconnect the thermal head power supply
harness from the power supply.
Fuses: Note the location of the power supply's fuses.
Engine fan: Note that the engine fan blows into the cardþcage.
Reverse these steps to reinstall the power supply and card cage.
Figure 8-32 Removing the card cage and power supply
Fuses
Power
supply
Card cage
6
5 Power supply harness
to printhead
8699-44A