Service manual

Service Manual 8-23
FRU Disassembly/Assembly 8
Motors
Paper-feed motor
1. Power down the printer and remove the power cord.
2. Remove the left side cabinet panel. Refer to the earlier topic “Printer cabinet
panels” on page 8-3.
3. Disconnect the wiring harness leading to the paper-feed motor.
4. Remove the two screws securing the paper-feed motor to the print engine
frame. Remove the motor.
Reverse these steps to reinstall the paper-feed motor.
Tools required
n #1 POSIDRIV® screwdriver
Figure 8-20 Removing the paper-feedþmotor
Paper-feed
motor
3
4
8699-45